Type
- Round Bar
- Sheet / Plate
- Square Bar
Service
- Forging
- Cutting
- Heat Treatment
- Turning
- Polishing
- Milling
Specifications are determined by daily stock. Customization is also acceptable.
Type
Service
Specifications are determined by daily stock. Customization is also acceptable.
STAND | Grade | C(%) | Mn(%) | P(%) | S(%) | Si(%) | Cr(%) | Ni(%) | Mo(%) | Cu(%) |
---|---|---|---|---|---|---|---|---|---|---|
GB/T 3077-1999 | 40Cr (A20402) | 0.37-0.44 | 0.50-0.80 | ≤0.035 | ≤0.035 | 0.17-0.37 | 0.80-1.10 | ≤0.30 | ≤0.15 | ≤0.30 |
GB/T 3077-1999 | 40CrA (A20403) | 0.37-0.44 | 0.50-0.80 | ≤0.025 | ≤0.025 | 0.17-0.37 | 0.80-1.10 | ≤0.30 | ≤0.10 | ≤0.25 |
GB/T 3077-1999 | 40CrE (A20406) | 0.37-0.44 | 0.50-0.80 | ≤0.025 | ≤0.015 | 0.17-0.37 | 0.80-1.10 | ≤0.30 | ≤0.10 | ≤0.25 |
ASTM A29/A29M-05 | 5140 | 0.38-0.43 | 0.70-0.90 | ≤0.035 | ≤0.040 | 0.15-0.35 | 0.70-0.90 | - | - | - |
EN 10083/3-2006 | 41Cr4 (1.7035) | 0.38-0.45 | 0.60-0.90 | ≤0.025 | ≤0.035 | ≤0.40 | 0.90-1.20 | - | - | - |
ISO 683/1:1987 | 41Cr4 | 0.38-0.45 | 0.60-0.90 | ≤0.035 | ≤0.035 | 0.10-0.40 | 0.90-1.20 | - | - | - |
JIS G4053-2008 | SCr440 | 0.38-0.43 | 0.60-0.90 | ≤0.030 | ≤0.030 | 0.15-0.35 | 0.90-1.20 | ≤0.25 | - | - |